Wavesfactory Trackspacer Overview
Wavesfactory Trackspacer is a new plugin from WavesFactory that helps the user create space in the mix when two sounds are fighting for the same sonic space by using multiband dynamic eq instead of compression such as the kick and bass occupying the same frequencies.I did a quick demo with some drum loops where there was some buildup in the lower mids and bass.With some quick tweaking i was able to fix the issue the actual settings i used are in the pic above.TrackSpacer creates space in the mix for an instrument voice or other audio by performing automatic multiband equalization on a channel.In real time it analyzes the audio frequency content in a track bus via sidechain and applies an intelligent 32 band Eq to subtract those frequencies from the channel bus where.The multiband compressors split the signal into different bands and apply different configurations in each band but detection is still the same as regular.
Wavesfactory Trackspacer is inserted in other words it gives room or space to a certain track by reducing its frequencies on another track in real time.The plugin on a channel to be processed next route the audio from another channel providing the control signal into its sidechain section.As you push up the main Ratio control you should notice more frequencies being removed from the processed channel.A graphical display shows two curves one for the control signals spectral content and one for the processed audios Eq curve.Two further controls limit the processing to a narrower range of frequencies.In fact these are just low and high pass filters which are applied to the control signals audio path.For example if you find too much bass is being subtracted then increasing the Lpf frequency will limit the effect in that area of the frequency spectrum.A Freeze button captures the Eq as a static curve.Compressors react to the amplitude volume level of the audio signal on the track.Depending on the intensity of the source signal applies more or less compression.
Wavesfactory Trackspacer Features
Wavesfactory Trackspacer 32 presents a band that reacts to the incoming side chain Analyzes the spectrum of the side chain and applies a reverse equalization curve to another track.As if by magic Trackspacer creates space for the main track by cutting the exact frequencies on other tracks.No more fighting for space to voice a mixture or any other instrument for that matter.If you have one you need room to breathe Trackspacer easy task Complicated automation moves in your mix are a thing of the past also offers an advanced panel where.You can specify that the plugin processes mid and side signal components separately rather than as a conventional stereo audio stream and the relative strength of processing for each.Here you also get a simple envelope section that determines the reaction speed of the overall processing. Both of these allow you to tweak the plugin to achieve less obvious unwanted sonic artefacts.
Wavesfactory Trackspacer Technical Details
Software Name :- Wavesfactory Trackspacer
File Size :- 63.15MB
Setup Type :- Offline Installer
Software Version :- V-2.5.3
Website :- www.wavesfactory.com
Wavesfactory Trackspacer System Requirements
Operating System :- Windows Xp/Vista/7/8/8.1/10
Wavesfactory Trackspacer Free Download
Click below button start Wavesfactory Trackspacer Free Download.This is offline installer and standalone setup for Wavesfactory Trackspacer.This would be working perfectly fine with compatible version of Windows.